Instructions
STEP 1:
Measure your box and cut decorative paper so it will cover the desired portions of the box. Apply decoupage glue to the box an area at a time, continuing until all the areas are covered. Apply decoupage glue over the decorative paper. Allow to dry.
STEP 2:
For a smoother finish, apply a second coat and allow it to dry, if desired.
STEP 3:
Using the sanding block, smooth out any edges that appear rough, if needed.
STEP 4:
Decide on the placement of the jewels. Apply a small amount of strong craft glue and set the jewel in the glue. Handling the jewels with tweezers might make this job easier. Allow glue to dry.
STEP 5:
Fill the box and enjoy!