A simply constructed felt iPad case is decorated and personalized using a beautiful punch needle design.
Instructions
STEP 1:
Complete the punch needle design according to instructions included with the kit. Trim the cottage background cloth 1/2 inch beyond design.
STEP 2:
Using pattern for case, cut out the front and back section for the case from the 12 inch squares of felt.
STEP 3:
Attach the punch needle design to the front (larger square).
STEP 4:
Lay the design flat on the front section, leaving approximately a 1 inch border plus a 1/2 inch seam allowance all around the edge.
STEP 5:
Using the sewing machine, sew flat 1/4” from the edge.
STEP 6:
Using the sewing machine and matching thread sew the decorative ribbon along the edges of punch needle design to cover the seams.
STEP 7:
With right sides facing, use sewing machine with brown thread - sew along the seams of the iPad case. Trim seams and turn inside out. Press using a damp cloth.
STEP 8:
Press flap over and attach the Velcro fasteners to underside of flap.
STEP 9:
Decorate closing using a ribbon bow and loop, stitched to the center edge of flap.
STEP 10:
Loop should be 2 inches long. Sew large decorative button 3 inches from top of case and centered from edges. Loop ribbon loop around button.