Select about 20 – 24 medium-large glass beads. Lay them out for placement on the headband.
Cut a piece of 28 gauge wire about 48” long.
Thread the one bead on to the wire and place it in the center. Twist the wire twice to keep the bead in place. Start from the center of the headband, lay the bead on top of the headband and wrap one end of the wire around the headband twice. Repeat for the other side. Loop one end of the wire around the bead to secure placement.
Working one side at a time, thread another bead onto the wire. Leaving a space between the beads lay the bead on top of the headband and wrap the wire. Loop the wire through the wrapped bead to secure.
Repeat 4 to add beads along both sides of the headband. Stop about 1 1/2” from the end of the headband on each side.
Cut another piece of 28 gauge wire about 48” long.
Thread on three to four 4mm crystals, 6mm crystals and small glass beads. Again, start from the center of the headband, lay the beads in between the larger glass beads and wrap the wire to attach.
Repeat 7 to add the smaller beads in between along the larger glass beads on both sides of the headband.
To finish: wrap the wire ends back through a couple of beads. Trim and tuck ends.